International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.

STAR TREK
1:350 TOS Star Trek Enterprise Motor Fan Blade and  Control  Boards 

This kit has the original effect of the Motorized Fan Effect by using the inside plastic spinning bussards that comes with the Polar Lights TOS Enterprise model kit. Also the control board for the Navigation/Strobe/Impulse Engine is included.  The two motors speed is adjustable from our state of the art micro circuit incorporated on the backside of the clock wise round led board. This special circuit developed by TenaControls will keep the motors rotating smoothly at all speeds.

All the connections to these boards are done by the supplied pre-connected wires coming out of the boards, color coded for easy wiring.

To make assembly even easier we supply all the Navigation, Strobe, Impulse and Shuttle bay LED's pre-wired, ready to be put in place and connected to the control board termination wires.

The supplied instructions also have a video link showing the process of how to install this kit into your Polar Lights model.

As always TenaControls uses commercial grade components in all our controls for reliability and longevity. Which is why we can offer a 5 Year Warranty  on the control boards and 1 Year Warranty on the motors for your peace of mind.


Also included:      

  • One (1) fully assembled Clock Wise Motor Fan Effect Board
  • One (1) fully assembled Counter Clock Wise Motor Fan Effect Board
  • One (1) fully assembled Nav/Strobe/Impulse Engine Board
  • Two (2) 3mm Shuttle Bay White LED's
  • One (1) 3mm Navigation Green LED
  • One (1) 3mm Navigation Red LED
  • Two (2) 3mm Navigation White LED's
  • Two (2) 3mm Impulse Engine Red LED's
  • Two (2) 3mm Strobe White LED's
  • Shrink tubing for some connections
  • Wiring Instructions
  • One (1) Momentary switch
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Important: No interior or window lighting supplied with this kit.  This board  works on 12 volt DC supply.

Item# TOSMTR-350 (model kit not included)

$187.40 plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.


1:350 TOS Star Trek Enterprise Motor Fan Blade and Control Boards
$187.40
Star Trek TOS Enterprise Photon and Phaser Board  for 1:350 Scale Polar Lights Model.

Add life to your Star Trek TOS Enterprise as well as other space ship models that could benefit from this effect.  All the connections to this boards are done to the 8 wire mating connectors, no soldering (to the control board).

This is a complete weapons effect board  with a Photon Torpedo and Phaser . This tiny board has two sound boards within it, allowing you complete control of firing just the Photon Torpedo or just Phaser  or fire both one after the other and be heard simultaneously through their individual speaker just like in the show - No waiting for one sound to stop so you can activate another one! Small enough to fit just about anywhere you'll feel comfortable placing it inside the ship.

As always, TenaControls uses commercial grade components in all our controls for reliability and longevity. That is why we can offer a 5 Year Warranty for your peace of mind.

  • One (1) Fully assembled board
  • Two (2) momentary switch
  • One (1) 9-volt battery clip
  • Two (2) 3mm White LED's
  • Shrink tubing for the LED's
  • Wiring Instructions
  • Two (2) JST 8-Pin Connectors
  • Two (2) speakers
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Important: No interior or window lighting supplied with this kit.  This board will also work on 12 volt DC supply.

Item# PTNPHR-TOS  (model kit not included)

$100.00 plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.


Star Trek TOS Enterprise Photon and Phaser Board for 1:350 Scale Polar Lights Model.
$100.00
1:350 TOS Star Trek Enterprise Fan Blade and Control Boards

The LED Fan Blade Effect's boards and Navigation/Strobe/Impulse Engine board is now available to anyone that would rather not listen to the motor sounds from the spinning bussards.

All the connections to these boards are done by the supplied pre-connected wires coming out of the boards, color coded for easy wiring.

To make assembly even easier we supply all the Navigation, Strobe, Impulse and Shuttle bay LED's pre-wired, ready to be put in place and connected to the control board termination wires.

The supplied instructions also have a video link showing the process of how to install this kit into your Polar Lights model. Check out our LED light effects from the two modes of operation, which should satisfy both camps of how the fan effect should look.

As always TenaControls uses commercial grade components in all our controls for reliability and longevity. Which is why we can offer a 5 Year Warranty for your peace of mind.

Also included:      

  • One (1) fully assembled Clock Wise Led Fan Effect Board
  • One (1) fully assembled Counter Clock Wise Led Fan Effect Board
  • One (1) fully assembled Nav/Strobe/Impulse Engine Board
  • Two (2) 3mm Shuttle Bay White LED's
  • One (1) 3mm Navigation Green LED
  • One (1) 3mm Navigation Red LED
  • Two (2) 3mm Navigation White LED's
  • Two (2) 3mm Impulse Engine Red LED's
  • Two (2) 3mm Strobe White LED's
  • Shrink tubing for some connections
  • Wiring Instructions
  • One (1) 9 volt battery clip
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Important: No interior or window lighting supplied with this kit.  This board will also work on 12 volt DC supply.

Item# TOSKIT-350 (model kit not included)


International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. TenaControls,LLC will not be responsible for any lost shipment in the destination Country.

$125.00 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



1:350 TOS Star Trek Enterprise Fan Blade and Control Boards
$125.00
1:1000 TOS Star Trek Enterprise Bussard Fan Blade Effect and Control Boards
$70.00 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



1:1000 TOS Star Trek Enterprise Bussard Fan Blade Effect and Control Boards
$70.00
TOS Rotating LED Bussard Nacelle Effect kit for 18 inch Enterprise
$69.00 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.




TOS Rotating LED Bussard Nacelle Effect kit for 18 inch Enterprise
$69.00
Photon Torpedo and Phaser Using External Audio Sound Board for Star Trek Enterprise 1701

Add life to your  Star Trek Enterprise 1701 and 1701-A refit as well as other space ship models. This is a completely Plug n Play System simulating the Photon Torpedo's ramp-up glow culminating into torpedo fire with a burst of light, as well as the Phaser effect. This system as stated earlier has an external Audio Sound Board for the sounds of the Photon Torpedo’s and Phaser synchronized to weapons light effects. Pressing the momentary switch once will activate the Photon Torpedo’s firing and Audio sequence, press the momentary switch twice will activate the Phaser firing and Audio sequence. This Audio Board has an additional feature,  a 3.5mm mono output jack allowing you to feed the sounds to an external sound system for theater type sound effects. Ideal for large scale models, like the Eight and Ten foot type studio replica ships being built. Last but not least, we can also incorporate approximately Five minutes of music or dialogue from your favorite Star Trek scenes if you wish.


  • Also included:  
  • One (1) fully assembled board - 0.9 inch x 1.730 inch
  • One (1) momentary switch to fire Photon Torpedo's and Phaser
  • One (1) White LED for Phaser
  • One (1) External Audio Sound Board
  • Two (2) Red LED's for Photon Torpedo
  • Wiring Instructions emailed to you
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Important: No interior or window lighting supplied with this kit.  This board will also work on 12 volt DC supply.

Item#: PHTPHS-AD-RFT  (model kit not included)




$ 96.50 plus S/H

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.


Photon Torpedo and Phaser Using External Audio Sound Board for Star Trek Enterprise 1701
$96.50
Star Trek Enterprise 1701 Combo Board  Timed to the First Star Trek Movie.  Nav / Strobe / Impulse Crystal/ Deflector / Nacelle / Landing Bay / Nacelle Grill Lights

This kit is designed to mimic the timed lighting of the Refit in the first Star Trek the Movie. TenaControls Brings Models to Life. Add life to your Star Trek Enterprise 1701-A as well as other space ship models.  All the connections to this boards are made to the Screw Down Terminal Blocks.  This is why we say this is the complete board. The board is designed to provide all the Navigation Lighting, all the Strobe Lighting, the Navigational Deflector Dish, Impulse Crystal, Impulse Engine, Landing Bay Sequential Landing Lights and the Nacelle Chiller Grills.


How this board functions: On power up the Navigation Lighting,  Strobe Lighting and Landing Bay Sequential Landing Lights will come on. Press the Manual momentary switch and  Navigational Deflector Dish will ramp up Amber to 50% power wait ten seconds and ramp to 100% power, wait ten more seconds and the Amber will start to ramp off while simultaneously the Blue will ramp up to 100% power. Press the Manual momentary switch again and the Impulse Crystal and Impulse Engines will Ramp Up Amber and stay that way, press the Manual momentary switch again and Impulse Crystal and Impulse Engines will Ramp off at this point in time the Nacelle Chiller Grills will come full on, press the Manual momentary switch again and Nacelle Chiller Grills will go off and the Impulse Crystal and Impulse Engines will Ramp Up Amber and stay that way, press the Manual momentary switch again and Impulse Crystal and Impulse Engines will Ramp off, press the Manual momentary switch again and Navigational Deflector Dish will ramp off. The Navigation Lighting, Strobe Lighting and Landing Bay Sequential Landing Lights will remain on.


One additional feature which is way cool, is the Demo Mode Switch. Press this momentary switch at anytime to place this control into an automatic mode. The first thing you’ll see, all the controlled features will turn off, then one by one they will come as stated above.  


The Combo-MVE is powerful, yet small enough to fit  just about anywhere you feel comfortable placing it inside the ship.

The Photon Torpedo is not included in the Combo-MVE board, however, the Photon Torpedo board

is a quality product we offer - Please see above for more information.


As always, TenaControls uses commercial grade components in all our controls for reliability and longevity. That is why we can offer a 5 Year Warranty for your peace of mind.

One (1) fully assembled board (1 5/8 inch x 1 1/2 inch)

Two (2) momentary switch

One (1) 9 volt battery clip

Seventeen (17) 3mm White LED's

Two (2) 3mm Green LED's

Two (2) 3mm Red LED's

Three (3) 5mm Amber LED's

One (1) 5mm Bi-color LED

Two (2) Blue LED Strips for Chiller Grills

Wiring and shrink tubing for the LED's

Thirteen (13) resistors

Wiring Instructions

Best warranty in the business - 5 Year Warranty

Made in the USA

Important: No interior or window lighting supplied with this kit.  This board will also work on 12 volt DC supply.

Item# Combo-MVE  (model kit not included)

$106.00 plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Star Trek Enterprise 1701 Combo Board Timed to the First Star Trek Movie. Nav / Strobe / Impulse Crystal/ Deflector / Nacelle / Landing Bay / Nacelle Grill Lights
$106.00
Star Trek Enterprise 1701 Refit Navigation/Strobe Board

This  board simulates the Navigation and Strobe lights on the Star Trek Enterprise 1701 and 1701-A Refit. You will receive all the Navigation LED's which are white, green and red as well as the white Strobe LED's.

This board fits nicely inside the saucer section for easy wiring to all the saucer sections, Navigation and Strobe LED's. Hot glue is recommended for securing the board in place.

This board can also be used in any model or application where LED's need to be controlled at a certain interval. Navigation - 1 second On/Off. Strobes On - twice per second. The board size is extremely small (0.70 inch x 0.875 inch)

Also included:      

  • Fully assembled - just connect switch, battery clip and LED's
  • One (1) Battery clip for 9 volt battery
  • One (1) on/off switch - commercial grade
  • One (1) Micro JST Connector with wires
  • Wiring and shrink tubing
  • Red, Green and White LED's
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Important: No interior or window lighting supplied with this kit.  This board will also work on 12 volt DC supply.

This board can also be used in any model or application where LED's need to be controlled at a certain interval.

Item#: 1001-BB  (model kit not included)

$39.89 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Star Trek Enterprise 1701 Refit Navigation/Strobe Board
$39.89
Photon Torpedo with Built in Audio Sound of Firing for Star Trek Enterprise 1701
$61.95 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Photon Torpedo with Built in Audio Sound of Firing for Star Trek Enterprise 1701
$61.95
Navigational Deflector Dish Ramp Up/Down - Amber & Blue for Star Trek Enterprise 1701
$29.40 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Navigational Deflector Dish Ramp Up/Down - Amber & Blue for Star Trek Enterprise 1701
$29.40
Landing Bay Sequential Runway landing Lights for Star Trek Enterprise 1701
$30.14 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Star Trek Enterprise 1701 Combo Board Nav/Strobe/Impulse/Deflector/Landing Bay
$103.95 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.




Star Trek Enterprise 1701 Combo Board Nav/Strobe/Impulse/Deflector/Landing Bay
$103.95
Star Trek Enterprise 1701 Combo Board Nav / Strobe / Impulse Crystal/ Deflector / Nacelle / Landing Bay /Nacelle Grill Lights
$103.95 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.




Star Trek Enterprise 1701 Combo Board Nav / Strobe / Impulse Crystal/ Deflector / Nacelle / Landing Bay / Nacelle Grill Lights
$103.95
Star Trek Enterprise 1701 Board  for Nav / Strobe / Photon / Phaser
$105.28 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Shields Up/Down Board for Star Trek Enterprise 1701-
$167.95 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.




RCS Thrusters  for Star Trek Enterprise 1701/A  
$60.32 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Star Trek Enterprise D Navigation Board

Welcome a new addition to brighten up your Enterprise D model Navigation light board. TenaControls uses the best commercial grade components in the manufacturing of all our controls.

Before shipping, each board is Digitally set in software to the correct time sequence, for the most accurate setting. This board is small enough to fit nicely anywhere there is reasonable space within the model or in the base, the choice is yours.

Also included:      

  • One (1) assembled board (0.7 inches x 0.875 inches)
  • One (1) on/off switch
  • One (1) 9 volt battery clip
  • One (1) Micro JST Connector with wires
  • Instruction manual
  • Wiring for the LED's
  • Shrink tubing
  • White Navigation LED's
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Important: No interior or window lighting supplied with this kit.  This board will also work on 12 volt DC supply.

This board can also be used in any model or application where LED's need to be controlled at a certain interval.

Item#:1001-DD  (model kit not included)

$37.00 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Photon Torpedo with Built in Audio Sound for Enterprise D
$60.00 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Star Trek Enterprise E Navigation Board

Welcome a new addition to brighten up your Enterprise E Model - The Navigation Light board! TenaControls uses the best commercial grade components in the manufacturing of all our controls.

Before shipping, each board is Digitally set in software to the correct time sequence, for the most accurate setting. This board is small enough to fit nicely anywhere there is reasonable space within the model or in the base, the choice is yours!

Also included:      

  • One (1) fully assembled board (0.7 x 0.875 inch)
  • One (1) on/off switch
  • One (1) 9-volt battery clip
  • One (1) Micro JST Connector with wires
  • Wiring for the LED's
  • Shrink Tubing
  • White LED's
  • Red LED's
  • Green LED's
  • Detailed instruction manual
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Important: No interior or window lighting supplied with this kit.  This board will also work on 12 volt DC supply.

This board can also be used in any model or application where LED's need to be controlled at a certain interval.

Item#: 1001-EE  (model kit not included)

$37.00 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Star Trek Enterprise E Navigation and Glowing Bussard Board
$65.00 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Photon Torpedo with Built in Audio Sound Star Trek Enterprise E
$60.00 plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Phaser Array Effect with Built in Audio Sound for Star Trek Enterprise E
$75.00 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.





1:350 NX-01 Star Trek Enterprise Plasma Bussard Control Board 

All the connections to this boards are made to the Screw Down Terminal Blocks. This is why we say this is the complete board. The board is designed to provide all the Navigation Lighting, all the Strobe Lighting, Glowing Impulse Engine and last but not least, control the Two Round Led Plasma effect boards, simulating the Red bussards. The NX-COMBO-A is powerful, yet small enough to fit just about anywhere you feel comfortable placing it inside the ship.

The Photon Torpedos and the Phase Cannons are not included in the NX-COMBO-A, we just could not put everything in one small board! Of course, we have that coming in a separate board, in the very near future. So there you have it, a complete control system for your Star Trek Enterprise NX-01 in Two Boards - How cool is that!

As always TenaControls uses commercial grade components in all our controls for reliability and longevity. That is why we can offer a 5 Year Warranty for your peace of mind.

Also included:      

  • One (1) fully assembled Control board (1 5/8 inch x 1 1/2 inch)
  • Two (2) Round Bussard boards (0.945 inch in diameter)
  • One (1) 9 volt battery clip
  • Two (2) 3mm White LED's
  • Two (2) 3mm Red LED's
  • Two (2) 3mm Green LED's
  • Two (2) 3mm Blue LED's
  • Two (2) 5mm Blue LED's
  • Two (2) Blue LED strips double sided 6" long
  • Wiring and shrink tubing for the LED's  
  • One (1) on/off rocker switch
  • One (1) Momentary switch
  • Wiring Instructions
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Item# NX-COMBO-A (model kit not included)

$108.95 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



1:350 NX-01 Star Trek Enterprise Phase Cannon and Torpedo Board


$90.30 Plus S/H
1:1000 NX-01 Star Trek Enterprise Bussard, Navigation,Strobe and Impulse Engines Control Board 

1:1000 NX-01 Star Trek Enterprise Glowing Bussards, Navigation, Strobe, Impulse Engines, Navigational Deflector Dish, Nacelle Grills and Lower Dome Lighting Control Board.

TenaControls Brings Models to Life! Add life to your Polar Lights 1:1000 scale Star Trek Enterprise NX-01.

All the connections to this boards are made to the Micro JST Connector. This is why we say this is the complete board. The board is designed to provide all the Navigation Lighting, all the Strobe Lighting, Glowing Impulse Engine, Glowing Red Bussards, Navigational Deflector Dish, Side Nacelle Lighting and last but not least, Lower Saucer Dome Lighting. The NX-01-1K is powerful, yet small enough to fit right in the Saucer of the ship.

As always TenaControls uses commercial grade components in all our controls for reliability and longevity. That is why we can offer a 5 Year Warranty for your peace of mind.

Also included:      

  • One   (1) fully assembled Control board
  • One   (1) 9 volt battery clip
  • One   (1) Green pre-wired SMD  
  • Three (3) Red pre-wired SMD  
  • Four  (4) Blue pre-wired SMD  
  • One   (1) Green 1.8mm LED  
  • One   (1) Red 1.8mm LED  
  • Three (3) 3mm White LED's
  • Two   (2) 1.8mm Blue LED's
  • Two   (2) 3mm Blue LED's
  • Six     (6) Resistors
  • Wiring and shrink tubing for the LED's  
  • One (1) Micro JST Mating Connector
  • Wiring Instructions
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Item# NX-01-1K  (model kit not included)

$80.00 plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.


1:500 Star Trek Enterprise Into Darkness Fan Blade and Controls Boards
$120.00 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



1:500 Star Trek Enterprise Into Darkness Photon and Phasers Board
$105.28 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



Star Trek USS Reliant NCC-1864 Navigation/Strobe Board  

This  board simulates the Navigation and Strobe lights on the Star Trek USS Reliant NCC-1864. You will receive all the Navigation LED's (white, green and red) as well as the white Strobe LED's. Also included, are the on/off switch, 9 volt battery clip, wiring for the LED's and shrink tubing. This board fits nicely inside the saucer section for easy wiring to all the saucer section Navigation and Strobe LED's. Hot glue around the printed circuit works well for locking into place.

Also included:      

  • Fully assembled - just connect switch, battery clip and LED's
  • One (1) Battery clip for 9 volt battery
  • One (1) on/off switch - commercial grade
  • One (1) Micro JST Connector with wires
  • Wiring and shrink tubing
  • Red, Green and White LED's
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Important: No interior or window lighting supplied with this kit.  This board will also work on 12 volt DC supply.

This board can also be used in any model or application where LED's need to be controlled at a certain interval.

Item#:1001-RR  (model kit not included)


$39.89 Plus S/H

USPS shipping any where in the United States. International shipping available, for an extra charge .

International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Starfleet Model Academy will not be responsible for any lost shipment in the destination Country.



LED Sequencer also known as LED Chaser for 18 inch Lost in Space Jupiter 2 Moebius Model
$72.45 Plus S/H
LED Sequencer also known as LED Chaser for 12 inch Lost in Space Jupiter 2 Polar Lights Model
$83.99 Plus S/H
LED Engine Sequencer for Lost in Space, Space Pod, 1:24th Scale model by Moebius Models
$35.69 Plus S/H
Lost in Space Laser Rifle Sound and Light
$76.80 Plus S/H
Lost in Space Laser Pistol Sound and Light
$72.40 Plus S/H

Moving Eye and Thruster kit for the Battlestar Galactica Cylon Raider

 For the Moebius Models 1:32 Cylon Raider

$40.95 plus S/H
$55.00 Plus S/H
War of The Worlds  Board  for Lights/Weapons and Audio
$88.00 Plus S/H
  Light kit for Area 51 UFO made by Pegasus Hobbies
$49.24 plus S/H
LED Engine Sequencer for Forbidden Planet Space Cruiser C-57D by Polar Lights Model

This is the 3rd Generation LED engine simulator incorporating Smooth Linear Drive turning on two LED's, every 90 degrees of rotation. A customer asked TenaControls to manufacture a device that can simulate the rotating engine of the C-57D Space Cruiser - and here it is!

This product can fit into the engine base and give that illusion, the only thing you have to do is paint the vertical lines.

Also included:      

  • One (1) fully assembled LED Sequencer with 32 Ultra Bright Red LED's
  • One (1) variable speed potentiometer (commercial grade)
  • One (1) battery clip for 9-volt battery
  • One (1) complementary 9-volt battery to get you started
  • One (1) on/off switch (commercial grade)
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA

Item#: FFPLC-57D (model kit not included)


$89.25 plus S/H

LED Engine Sequencer for Forbidden Planet Space Cruiser C-57D by Polar Lights Model



This smaller version LED engine simulator incorporating Smooth Linear Drive turning on two LED's, every 90 degrees of rotation.  

This product can fit into the engine base and give that illusion, the only thing you have to do is paint the panels for a nice diffused effect.

Kit includes:      

One (1) fully assembled LED Sequencer with 12 Ultra Bright Red LED's

One (1)  magnetic switch to change settings

One (1) battery clip for 9-volt battery

One (1) loose magnet to change settings

Best warranty in the business - 5 Year Warranty

Made in the USA

Item#: FFPLC-57D-(model kit not included)

$38.75 plus S/H



CARS
BATMOBILE

Lighting System for 1966 Batmobile

1:25 Scale Model Kit From Polar Lights

This board was designed to Boyd (a.k.a., Trekworks) specifications at Scale Model Action on YouTube. Please review Scale Model Action videos in order to see which led's you need to purchase and  wiring tips.

We've wired the 9 volt battery holder and micro On/Off slide switch which turns the car light board on or off to the board for your convenience. You just need plug in the 8 wire JST connector into the mating connector on the board and connect the LED's to their corresponding wire coming from the 8 wire JST connecter.



Feature’s included:      

  • Three outputs for beacon
  • Bat Phone
  • Data Scope
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA


Item#: BAT-AA  (model kit not included)

$30.00 plus S/H
1:25 SCALE CAR KIT LIGHTING

This board can be used on any 1/25 scale model car and bring it to life.

Features include: daytime driving lights on high beams, left and right directional rear brake light function, rear back up lights, hazard lights, automatic mode*

*Automatic mode - all the above light modes are cycled through automatically, pausing for a short time on each light mode to enjoy the function before moving on to the next mode.

We've wired the 12 volt battery holder and micro On/Off slide switch which turns the car light board on or off to the board for your convenience. You just need plug in the 8 wire JST connector into the mating connector on the board and connect the LED's to their corresponding wire coming from the 8 wire JST connecter.

The magnetic reed switch allows you to toggle through all the light modes, just by using the enclosed supplied magnet. This feature allows for the car to stay intact, no holes for a momentary switch (on plastic model cars)

What's included:

  • One (1) fully assembled board - just connect the LED's.
  • One (1) battery clip for 12 volt battery and 12 v battery.
  • One (1) on/off switch wired to the board.
  • One (1) magnetic reed  switch.
  • One (1) magnet.
  • Shrink tubing.
  • Red, Orange and White LED's.
  • Miniature 8 wire JST connector.
  • Best warranty in the business - 5 Year Warranty
  • Made in the USA


Item#: CARL-BB  (model kit not included)

$42.00 plus S/H